Everything2Stroke Forum banner

Banshee won't rev

7.6K views 8 replies 5 participants last post by  zillaguy89  
#1 ·
My Shee won'rev at all, idle is fine but as soon i hit the throttle the bike wants to stall, sounds like a cutoff, compression if perfect on both cylinders, maybe a bad coil ????
 
#4 ·
Its probably the tors get a tors removal kit there on ebay pretty cheap and i think toomey offers one too.
 
#5 ·
check the T.O.R.S. switch at the parking brake lever. if the parking brake lock is not making a good contact it will not rev. this is the most common area that will trigger the override to cut the engine back to an idle. they become loose and will lose contact.
 
#6 ·
strokeittwice443 said:
check the T.O.R.S. switch at the parking brake lever. if the parking brake lock is not making a good contact it will not rev. this is the most common area that will trigger the override to cut the engine back to an idle. they become loose and will lose contact.
exactly what I was thinking
 
#7 ·
I had the same issue and just unplug the parking brake connector at the lever/perch area and no more issues.