Everything2Stroke Forum banner
1 - 20 of 90 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
what kinda ride you got?

I have a blaster that I am puttin a old kawasaki 350 2 stroke single cylinder air cooled dirt bike engine thats been bored to a 360 in it.

first I cut all the engine mounts off, then I cut the 2 bars that run from the middle of the front of the frame to the bottom of the front. I cut them off half way and ran them from there strait down.(ya confusing, I couldn't figure out how to explain it) that gave me more room.

I was able to just reuse some of the engine mounts and just relocate them.I made a few more brackettes. 1 of them had to be a removeable brackette. I thought it was gonna be easy but it was a pane in the but. the sprockets were shot, but my dad noticed that a banshee sprocket looks like it will fit, so we tried 1 of his old ones, and it fit. were going to be using k&n clamp-ons.

the engine fits but when I take it out or put it in I have to take the head off.
I nead to get a longer throttle cable and order some chain sliders. then I have to figure out the wiring(head lights,brake lights ect) and I'll be done.
 

·
Banned
Joined
·
0 Posts
rides huh well heres my list

96 banshee (see sig for mods)

87 banshee w/94 engine (wrecked and twisted and totally stock)

projects to come


old 87 frame is gonna get a KZ650 I4 engine (yeah yeah it's a thumper)

the 94 engine will hopefully see a newer frame


SUCICIDE TRIKE (alky YZ250 mirco sprint engine hopefully w/ nitrous) +8 swingarm. and wheelie bars very strong wheelie bars


hopefully a chrysler SNO RUNNER (goto http://www.snorunner.com to se what i'm talking about)
 

·
Premium Member
Joined
·
8,580 Posts
Chopper 2-Stroke

I would love to see and own a custom Chopper with a 520 Banshee Motor in it. Just something I have been throwing around in my little head of mine.
 

·
Banned
Joined
·
0 Posts
i was thinking of buying a RZ350 just because it's banshee powered.

banshee i think you should make it a smaller chopper. not a mini but maybe like a 3/4 chopper. i don't think they exist but it would look pretty cool if you made it exist
 

·
Premium Member
Joined
·
8,580 Posts
Yeah that would be a good combo with having the banshee and an RZ. I looked at the sno-runner what size motor does that have. If I find one I'm buying it. It looks like way to much fun.
 

·
Registered
Joined
·
183 Posts
That would be bad ass with a 2 stroke powerplant in a chopper. Nobody would even hear it comin....Wait, am i wrong!
 

·
Banned
Joined
·
733 Posts

·
Banned
Joined
·
0 Posts
i forget what size engine they have. i think it a 75cc or something. i do know that they are supposed to do about 50 stock. me and a friend of mine are gonna buy them and i have another friend that already has one. but what those to guys don't know is that it uses teh same engine us820 (i think) that they put in racing go karts. that means mines gonna get a port and polish, milled head and i tihkn they have a pipe for a sno runner that they sell on snorunner.com. i'm thinking probably like 65mph for me. i should have health insurance by then........hopefully
 

·
Banned
Joined
·
0 Posts
oh yeah the RZ is cool as hell. i'd like to get one but then again i'm not much of a two whellin kinda guy. ah hell i can learn right??
 

·
Registered
Joined
·
40 Posts
hey 370banshee, if u wanna really fly with your project banshee, dont use the Kawasak 650, find a kawasak 750 triple two stroke motor. You will really be flying then.
 

·
Banned
Joined
·
0 Posts
i have a suzi 750 triple 2 stroke in my garage. problem with those big two strokes is getting pipes to fit a banshee. i've already called fast by gast to build them. it costs bout $600 for the pipes that "should" fit. anymore i'm thinking bout a 540 ski doo. or maybe a 600 rotax sled engine and maybe a polaris trans with high low range and reverse. what you think??
 

·
Registered
Joined
·
735 Posts
If you have some duct tape and a helmet I will ride.
 

·
Registered
Joined
·
801 Posts
370banshee said:
all i can afford is an ice cream bucket and some elmers glue?? any takers now
I will I will.
 
1 - 20 of 90 Posts
Top