Joined
·
669 Posts
Looking for info. How reliable are the vito 240 kits with 3mm stroker crank on pump gas toomy pipe an upgraded carb? Will i be constantly rebuilding it?
vitos 240bb and 3mm stroker crank
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Need help please DC reg/rec wiring
Yamaha BlasterHey all I have a blaster 200, the previous owner wired the whole thing for racing and removed the lighting circuit, I took the flywheel off the other day and replaced the stator with a 4 wire stator and wired the quad up to run as normal off the ignition coil but when I connected the yellow/red...- 0
- 49
-
Craig yfs 200 · updated
-
Need help
Yamaha BlasterMy blaster only runs on choke but after about 10 seconds it starts to die- 0
- 36
-
Blaster dies after warm up
Yamaha BlasterNew to the forum and so I just bought a blaster about a month ago and it was a non running blaster. Pull started if and it started up. Never was able to kick start but it'd start and run when pulled. And it'd kick start after warm up. So I rebuilt the carb thinking that might've been the problem...- 0
- 157
-
Speed Limiter? Governor?
Yamaha BlasterNew to the ATV community. Did some googling and was unable to come up with a sufficient answer. I'm looking to buy a 200 Blaster but want to know if it comes with a speed limiter or if one could be installed aftermarket?- 1
- 322
-
Need feedback...
Yamaha BlasterJust recently bought a 2006 Blaster 250.... i was told their is only a few hours on the new top and bottom end, but the bike has been sitting up for about 18 months. It seems to be in excellent shape and well kept. All fluids were drained from the bike and i bought it as is. I went to the yamaha...- 0
- 214
Join now to ask and comment!