Everything2Stroke Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I was wondering if someone could tell me where I can find 5 hole wheels for my quadzilla. I can not seem to find any. Thanks
 

·
Registered
Joined
·
93 Posts
Tx_ATV_1 said:
I was wondering if someone could tell me where I can find 5 hole wheels for my quadzilla. I can not seem to find any. Thanks
Honestly the best thing you can do is buy a set of Z400 hubs and make it a current bolt pattern. if not e-bay and Douglas carries them.
 

·
Registered
Joined
·
93 Posts
sblt500r said:
www.rockymountainatv.com has them, douglas, or itp in all sizes. you can even get beadlocks.

Not really in all sizes. When i went looking for 5 bolt rims I was pretty limited to 10in rims. I never saw anything but those. It is one of the main reasons I went with the Z400 hubs in order to be able to have a better selection of rims. Even if you want to keep the 5 bolt ones like I have I just leave the hubs bolted up and swap them by the castle nut all in one when I want to use those rims and tires
 

·
Registered
Joined
·
93 Posts
Z400 hubs bolt right up to Quadzilla axles. Then you have a current 4 bolt pattern and just about any wheel and tire combo available to buy.

Here is a pic of mine for proof.
 

·
Registered
Joined
·
735 Posts
u can get 5 lug Zuki wheels in 8" , 9" , and 10" Not a problem. I know this for fact cause I have owned all 3 sizes. Rockymountain should have them. If they are not listed just call em and they can hook you up.
 

·
Registered
Joined
·
93 Posts
sblt500r said:
i have a set of 8 inch 5 bolt rims, plus i've seen 9 inches, so they are available.

it depends on what year you have for the z400 hubs to fit. 85-87 have a different spline count then the 88-92 lt's.

We are talking Zilla right? Then it is was only out from 87 to 90 and they fit all years. It fits the 26 pline axle if I remeber right.

It is a good thing to hear they make them in 8 and 9 inch rims because when I looked All I could find was 10's. Next time I need them I will call them.

EDIT. Here is a link to ITP's entire line. Looks like alot of the 5 bolt stuff is discontinued but they do list some.
http://www.itptires.com/techinfo.html
http://www.itptires.com/2006ATVproductguide.xls

So looks like I needed to dig deeper last time I was looking.
 

·
Registered
Joined
·
2,579 Posts
icecleric said:
We are talking Zilla right? Then it is was only out from 87 to 90 and they fit all years. It fits the 26 pline axle if I remeber right.

It is a good thing to hear they make them in 8 and 9 inch rims because when I looked All I could find was 10's. Next time I need them I will call them.

EDIT. Here is a link to ITP's entire line. Looks like alot of the 5 bolt stuff is discontinued but they do list some.
http://www.itptires.com/techinfo.html
http://www.itptires.com/2006ATVproductguide.xls

So looks like I needed to dig deeper last time I was looking.
yes the zilla was only made from 87-90. bones9401 has a lt250r so i was including all the years. i've heard though, that some of the early 87 zilla's had a different spline count. not sure though.
 

·
Registered
Joined
·
11 Posts
I was wondering if someone could tell me where I can find 5 hole wheels for my quadzilla. I can not seem to find any. Thanks
I just picked up an 87 Quadzilla and gonna change the rear to a 1988 Honda TRX250R set up...no more 5 stud, nor Full Floater and hello 4 studs and Pro Link!!
 
1 - 14 of 14 Posts
Top