Joined
·
3 Posts
Hey all
I have a blaster 200, the previous owner wired the whole thing for racing and removed the lighting circuit, I took the flywheel off the other day and replaced the stator with a 4 wire stator and wired the quad up to run as normal off the ignition coil but when I connected the yellow/red wire from my stator (AC) and grounded the reg/rec to the frame I could only get 5 volts from the reg/rec does anyone know what I'm doing wrong I put lights on the quad and really want to get them working any input is greatly appreciated, see attachment below, this how I wired it, thanks in advance
I have a blaster 200, the previous owner wired the whole thing for racing and removed the lighting circuit, I took the flywheel off the other day and replaced the stator with a 4 wire stator and wired the quad up to run as normal off the ignition coil but when I connected the yellow/red wire from my stator (AC) and grounded the reg/rec to the frame I could only get 5 volts from the reg/rec does anyone know what I'm doing wrong I put lights on the quad and really want to get them working any input is greatly appreciated, see attachment below, this how I wired it, thanks in advance
Attachments
-
379.7 KB Views: 67