Everything2Stroke Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
1,305 Posts
just bypass as much shit as possible
 

·
Registered
Joined
·
383 Posts
Get a automotive electrical test kit from Wally world and start checking the wires w/the scematic. It should be fairly basic wireing.
 

·
Registered
Joined
·
314 Posts
If the problem is a bad switch, I have a nice ignition with key and kill switch. I'll make you a good deal. PM me if interested.
 

·
Registered
Joined
·
36 Posts
Discussion Starter #6
well it appears that everything is hooked up.. did something come unplugged??? broken wire?? if so what wire would it be where both the kill switch and the key do not work...
 

·
Registered
Joined
·
144 Posts
well if the mag on a bike works the same as on a plane you need to ground it to shut if off so if your ground is bad it wont shut off.
 

·
1985-1986 Lt250r Genius
Joined
·
2,332 Posts
All that switch does is ground the plug wire to the frame. You can just rewire those pretty easy. I would reccomend bypassing that switch & getting a tether...
 

·
Registered
Joined
·
144 Posts
All that switch does is ground the plug wire to the frame. You can just rewire those pretty easy. I would reccomend bypassing that switch & getting a tether...
cool i was right.
 
1 - 12 of 12 Posts
Top