Everything2Stroke Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
blaster won’t start
I just rebuilt bottom end and put a new top end On my 97 Blaster I’ve cleaned out the Carburetor pilot jetMain jet football adjusted float level I’ve got plenty of spark I just don’t know why it won’t start any help?
 

·
Registered
Joined
·
2 Posts
check the carbs to make sure they are getting fuel and that all the jets and valve is cleaned. if it doesn't start still after new plugs and the carbed clean, it might be an electrical problem. the coil might be bad, the CDI might be bad. but you can worry about those after you get the plug and clean the carb.
 
1 - 2 of 2 Posts
Top