Everything2Stroke Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
My 99 blaster was having trouble running so i was told to remove the tors. I removed the tors now it doesnt idle and bogs when i give it throttle. Everything on the quad is fine so do i just need the tors eliminator kit?

Also having trouble with my 04 blaster when it comes to tors. I just got my vitos big bore 240 kit installed and I broke the big flat head screw on top of my carb cap. Now it idles fine but when i give it throttle it bogs. Could that just need a tors eliminator kit too?
 

·
PLAYTIME'S OVER BITCHES!!
Joined
·
13,056 Posts
if you removed the TORS cap from the carb, did you install the idle screw as well? you also need to disable the system. I would hope that you are not trying to run the stock 26mm carb on that 240BB kit. that needs at least a 35mm carb on it in my opinion.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I havent switched out the carb yet im just trying to get it running right first. and i havent installed the idle screw just wanting to make sure i need to do all that before i drill into the carb.
 
1 - 3 of 3 Posts
Top