Everything2Stroke Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
My banshee wont idle it has factory OEM carbs on it with no idle screws cause the hole the idle scre goes in is blocked by metal, im very confused and i need help ASAP!!
If you have stock carburettors and TORS is still connected to caps remove the seat and you'll see the TORS on top of each carburettor on these you'll see a round knob turn these clockwise a fraction at a time until it idles ensure they are both adjusted exactly the same/hope this helps
 
1 - 2 of 2 Posts
Top