Everything2Stroke Forum banner

1 - 1 of 1 Posts

39 Posts
Discussion Starter #1
Bought an aftermarket cdi, it does require the addition of a rectifier / small battery, which isn't a problem I can simply float the lighting coils wire and run an extra wire for ground to the rectifier.

My problem is that the cdi box only provides one ground for the 12v dc and for the source android pickup coils, how can I make this work without feeding a/c power back through the ground to my dc system.
I can completely float all ground off the frame and to their individual circuits,but that still leaves a common ground at the cdi box.
$_3.JPG $_3.JPG $_3.JPG $_3.JPG
1 - 1 of 1 Posts