Everything2Stroke Forum banner
1 - 2 of 2 Posts

· Registered
2 Posts
Discussion Starter · #1 ·
To start off I got this bike for free with a bad top end. Its bored 80 over and has a FMF fatty with stock silencer.

I went through the carb (its the stock keihin PE) and it has the stock jetting in it.

I've jetted carbs before and understand the process I'm just not really sure where to start with this one.

Anyone have a clue as to a good starting point with the jetting? It would be greatly appreciated
1 - 2 of 2 Posts